Fix PC Gaming Performance Before Blaming Your Hardware

Your frame rate is not just a hardware problem. Software settings, background processes and one badly placed cable can waste gaming performance before your graphics card gets a chance to show off.
Steam is a sensible place to start because it launches with the system, loads community assets in the background and runs an in-game overlay. Those features consume resources and bandwidth, while multiple overlays and background apps can turn a playable game into a stuttering mess.
Start with Steam’s performance settings
Open Steam’s settings and toggle off “Enable the Steam overlay while in game” if games stutter, drop frames or crash. The overlay provides access to community guides, friend invites, frame rate limiters and in-game purchases, but Valve’s overlay usually lowers FPS by only “maybe a couple of percentage points at most.”
That modest cost does not make the overlay harmless in every setup. Disabling it stops Steam’s background tools and web browser from using resources, which can save bandwidth and improve system stability—especially when several games show the same problems.
If the overlay does not solve the issue, open the Library section in Steam’s settings and enable Low Bandwidth Mode and Low Performance Mode. Test your in-game FPS after enabling both, then switch off Low Bandwidth Mode and test again if the frame rate improves.
Low Bandwidth Mode stops Steam from loading community guides, artwork and video content in the background. That activity does not affect FPS directly, but it can consume surprising amounts of bandwidth; leaving the setting on may help games with online components or always-online requirements remain stable.
Low Performance Mode disables category transitions, game selection effects and various icons in Steam’s library tab, freeing system memory for the game. It will not create a night-and-day difference on most systems, but weaker hardware has less room for decorative software to make itself useful.
Check the cable before changing everything else
Desktop PCs with dedicated graphics cards often place HDMI, DisplayPort and USB-C connections on both the motherboard and the graphics card. The same cable fits either set of ports, which is convenient right up until the monitor is connected to the wrong one.
Connect the monitor to the dedicated graphics card’s outputs. Motherboard video ports typically use the processor’s integrated graphics, if the processor has them, while the dedicated card sits in a PCIe slot and offers stronger gaming performance.
The motherboard ports usually sit beside the USB, Ethernet and audio connections. The graphics card’s ports sit on a separate expansion bracket, often lower on the back of a tower and often horizontal, though the layout is not universal.
Using a motherboard port can leave Windows running the game on integrated graphics, or can make the dedicated card render frames and pass them through the integrated graphics, adding overhead. Microsoft does not state a percentage for that performance loss, and some systems show only a black screen; Intel desktop processors with an F or KF suffix lack integrated graphics, so their motherboard video outputs will not work.
Turn off and unplug the PC before moving the cable. Connect it to the graphics card, select the matching monitor input and, in Windows 11, check Settings > System > Display > Advanced display to confirm the refresh rate.
A 100Hz monitor set to 60Hz displays only 60 updates per second, regardless of how many frames the graphics card renders. HDMI and DisplayPort both support high-refresh-rate gaming when the graphics card, monitor and cable support the chosen resolution and refresh rate.
Reduce shader stutter with care
Shader stutter is not the same as an ordinary hardware bottleneck. It happens when the rendering pipeline produces effects in real time, forcing the next frame to wait for a shader to compile and causing a brief visual hitch that resembles a frame-rate drop.
Shader Compilation Stutter Killer (SCSKiller) is a free app designed to pre-compile shaders into the graphics card’s driver cache. It flagged games under a “Recommended to compile” list and more or less eradicated compilation stutter in Silent Hill f, Silent Hill Townfall, Elden Ring and The Witcher 3: Wild Hunt — Remastered.
Support is uneven. Many games may show “Not supported yet” because their shaders are compressed or packed and need an engine reader, though the built-in “Record while I play” feature can analyze a game after 10 minutes or so of gameplay.
Pre-compilation can also take time: Hogwarts Legacy required 17 minutes for 291,688 shaders, and SCSKiller could not fix its six major compilation hitches during a 10-minute run. The app can trigger bans in games with anti-cheat software, so Elden Ring should launch offline when using it.
VRR displays, including NVIDIA G-Sync and AMD FreeSync, can smooth common stutters and reduce screen tearing, but they cannot fix CPU-based compilation stutters. Games with traversal stutter and CPU spikes can still show visible hitching without a VRR display.
Keep laptops cool without sacrificing performance
Laptop fans respond to heat, and background processes can create that heat even after every visible app is closed. Windows Update, search indexing, startup apps and other running processes place demands on the processor, RAM and storage; Microsoft says the initial indexing process can take a few hours.
Press Ctrl + Shift + Esc, open Startup apps in Task Manager and disable anything non-essential. On Windows, change the power mode through Settings > System > Power & battery > Power mode; the performance option favors speed over power savings, which means more heat and more fan noise.
Keep ventilation openings clear, avoid blocking airflow while working from bed and use compressed air to remove dust. Dell and Apple recommend unobstructed ventilation, while Apple says higher ambient temperatures make fans start sooner and run faster.
Install BIOS, chipset and graphics driver updates, and use manufacturer tools such as Dell Power Manager for power controls. If heavy fan activity continues during light workloads, investigate hardware issues; some Dell laptops offer fan tests through preboot diagnostics by pressing F12 at the Dell logo and selecting Diagnostics.
Valve is also adding better performance evidence for Steam Deck owners. Each game’s Steam Deck Compatibility section can show average frame rate for Steam Deck OLED and LCD devices when enough data exists, and users can opt in to provide anonymous frame-rate data.
Based on
- Which Steam settings should you change to improve gaming performance? — engadget.com
- One Cable Mistake Could Be Killing Your Desktop PC’s Gaming Performance — engadget.com
- How SCSKiller Is Trying To Fix Shader Stuttering In PC Games — engadget.com
- Some much-needed clarity for Steam Deck game performance. | The Verge — theverge.com
- Why Your Laptop Fans Spin Up Even When You’re Not Doing Anything — engadget.com




